The correct way to install steel coils
The correct way to load steel coils depends on their size, weight and how they are transported or stored.
13
2024
/
05
Angle steel is a versatile structural steel that is widely used in various fields.
13
2024
/
05
The specification requirements for the length of the steel bar binding overlap shall not be less than 300mm. The minimum overlap length shall meet the specification requirements. According to the calculation of the overlap ratio, the vertical steel bar binding overlap position of the shear wall shall be turned up after the floor concrete of this floor is poured. Set steel joints about 1m apart. According to national standards, the overlap length of steel bars should be calculated according to the formula L=1.2d (1+λ)/α, where L is the overlap length, d is the diameter of the steel bar, λ is the length ratio of the stressed members, and α is the steel bar The ratio of tensile strength to the axial compressive strength of concrete.
13
2024
/
05
The connection methods of steel pipes are
The connection methods of steel pipes mainly include threaded connection, flange connection, welded connection, clamp connection and butt welding connection.
13
2024
/
05
Main components of steel plate
Chromium, copper, nickel and other alloying elements may also be added to the steel plate. These elements can improve the corrosion resistance and high-temperature strength of the steel plate. They are often used to manufacture steel plates in impact resistance, wear resistance, marine engineering, nuclear engineering and other fields.
13
2024
/
05
The density of steel rods typically ranges from 7.85g/cm³ to 8.3g/cm³, depending on the type and composition of the steel.
13
2024
/
05
CONTACT US
Tel：+8613780638653
Email：teste@sdtststeel.com
WhatsApp：+8613780638653
Add： 20 meters south of China Postal Savings Bank Liuting Business Office,Liuting Street,Chengyang District,Qingdao Shandong
GET A FREE QUOTE
Copyright : Qingdao Test Metal Products Co., Ltd.
